Nachricht an mein zukünftiges ich - keine WD Green mehr kaufen
root@Microknoppix:~# dmesg
[ 5348.976641] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 5348.976645] ata2.00: BMDMA stat 0x24
[ 5348.976649] ata2.00: failed command: READ DMA
[ 5348.976655] ata2.00: cmd c8/00:08:c0:a7:0c/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 5348.976655] res 51/40:00:c0:a7:0c/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 5348.976659] ata2.00: status: { DRDY ERR }
[ 5348.976661] ata2.00: error: { UNC }
[ 5348.993756] ata2.00: configured for UDMA/133
[ 5348.993767] sd 1:0:0:0: [sdb] Unhandled sense code
[ 5348.993770] sd 1:0:0:0: [sdb]
[ 5348.993773] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 5348.993775] sd 1:0:0:0: [sdb]
[ 5348.993778] Sense Key : Medium Error [current] [descriptor]
[ 5348.993782] Descriptor sense data with sense descriptors (in hex):
[ 5348.993783] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 5348.993793] 00 0c a7 c0
[ 5348.993798] sd 1:0:0:0: [sdb]
[ 5348.993802] Add. Sense: Unrecovered read error - auto reallocate failed
[ 5348.993805] sd 1:0:0:0: [sdb] CDB:
[ 5348.993807] Read(10): 28 00 00 0c a7 c0 00 00 08 00
[ 5348.993815] end_request: I/O error, dev sdb, sector 829376
[ 5348.993832] ata2: EH complete
[ 5433.546729] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 5433.546734] ata2.00: BMDMA stat 0x24
[ 5433.546737] ata2.00: failed command: READ DMA
[ 5433.546743] ata2.00: cmd c8/00:08:c0:a7:0c/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 5433.546743] res 51/40:00:c0:a7:0c/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 5433.546747] ata2.00: status: { DRDY ERR }
[ 5433.546750] ata2.00: error: { UNC }
[ 5433.600631] ata2.00: configured for UDMA/133
[ 5433.600642] sd 1:0:0:0: [sdb] Unhandled sense code
[ 5433.600645] sd 1:0:0:0: [sdb]
[ 5433.600648] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 5433.600651] sd 1:0:0:0: [sdb]
[ 5433.600653] Sense Key : Medium Error [current] [descriptor]
[ 5433.600657] Descriptor sense data with sense descriptors (in hex):
[ 5433.600659] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 5433.600668] 00 0c a7 c0
[ 5433.600673] sd 1:0:0:0: [sdb]
[ 5433.600677] Add. Sense: Unrecovered read error - auto reallocate failed
[ 5433.600680] sd 1:0:0:0: [sdb] CDB:
[ 5433.600682] Read(10): 28 00 00 0c a7 c0 00 00 08 00
[ 5433.600690] end_request: I/O error, dev sdb, sector 829376
[ 5433.600707] ata2: EH complete
[ 5953.572356] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 5953.572360] ata2.00: BMDMA stat 0x24
[ 5953.572364] ata2.00: failed command: READ DMA
[ 5953.572370] ata2.00: cmd c8/00:08:d8:a7:0c/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 5953.572370] res 51/40:00:d8:a7:0c/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 5953.572374] ata2.00: status: { DRDY ERR }
[ 5953.572376] ata2.00: error: { UNC }
[ 5953.583218] ata2.00: configured for UDMA/133
[ 5953.583229] sd 1:0:0:0: [sdb] Unhandled sense code
[ 5953.583232] sd 1:0:0:0: [sdb]
[ 5953.583235] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 5953.583238] sd 1:0:0:0: [sdb]
[ 5953.583240] Sense Key : Medium Error [current] [descriptor]
[ 5953.583244] Descriptor sense data with sense descriptors (in hex):
[ 5953.583246] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 5953.583255] 00 0c a7 d8
[ 5953.583260] sd 1:0:0:0: [sdb]
[ 5953.583264] Add. Sense: Unrecovered read error - auto reallocate failed
[ 5953.583267] sd 1:0:0:0: [sdb] CDB:
[ 5953.583269] Read(10): 28 00 00 0c a7 d8 00 00 08 00
[ 5953.583277] end_request: I/O error, dev sdb, sector 829400
[ 5953.583294] ata2: EH complete
root@Microknoppix:~# smartctl -a /dev/sdb
smartctl 6.2 2013-04-20 r3812 [i686-linux-3.9.6] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Green
Device Model: WDC WD10EADS-11M2B2
Serial Number: WD-WCAV57873263
LU WWN Device Id: 5 0014ee 2aeaee9a2
Firmware Version: 80.00A80
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Sep 22 21:22:20 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (19800) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 228) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3031) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 6
3 Spin_Up_Time 0x0027 126 122 021 Pre-fail Always - 6675
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 518
5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 1
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5141
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 449
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 27
193 Load_Cycle_Count 0x0032 189 189 000 Old_age Always - 34527
194 Temperature_Celsius 0x0022 117 095 000 Old_age Always - 30
196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1
197 Current_Pending_Sector 0x0032 192 192 000 Old_age Always - 1396
198 Offline_Uncorrectable 0x0030 200 192 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 136 000 Old_age Offline - 59
SMART Error Log Version: 1
Warning: ATA error count 192 inconsistent with error log pointer 3
ATA Error Count: 192 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 192 occurred at disk power-on lifetime: 5141 hours (214 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 d8 a7 0c e0 Error: UNC 8 sectors at LBA = 0x000ca7d8 = 829400
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d8 a7 0c e0 08 01:41:35.927 READ DMA
c8 00 08 d0 a7 0c e0 08 01:41:35.885 READ DMA
c8 00 08 c8 a7 0c e0 08 01:41:35.221 READ DMA
c8 00 08 c0 a7 0c e0 08 01:41:35.221 READ DMA
Error 191 occurred at disk power-on lifetime: 5141 hours (214 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 c0 a7 0c e0 Error: UNC 8 sectors at LBA = 0x000ca7c0 = 829376
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c0 a7 0c e0 08 01:32:56.448 READ DMA
c8 00 08 b8 a7 0c e0 08 01:32:56.448 READ DMA
c8 00 08 b0 a7 0c e0 08 01:32:56.448 READ DMA
c8 00 08 a8 a7 0c e0 08 01:32:56.448 READ DMA
c8 00 08 a0 a7 0c e0 08 01:32:56.448 READ DMA
Error 190 occurred at disk power-on lifetime: 5141 hours (214 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 c0 a7 0c e0 Error: UNC 8 sectors at LBA = 0x000ca7c0 = 829376
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c0 a7 0c e0 08 01:31:31.968 READ DMA
c8 00 08 b8 a7 0c e0 08 01:31:31.923 READ DMA
c8 00 08 b0 a7 0c e0 08 01:31:31.901 READ DMA
c8 00 08 a8 a7 0c e0 08 01:31:31.901 READ DMA
c8 00 08 a0 a7 0c e0 08 01:31:31.804 READ DMA
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@Microknoppix:~# badblocks /dev/sdb
414700
414701
414724
414725
414726
414727
414732
414740
414768
414769
414770
414771
415820
415821
415822
415823
415832
415872
415873
415874
415875
418140
418141
418142
418143
418168
^C
Interrupted at block 418169
root@Microknoppix:~# badblocks /dev/sdb
414716
414717
414718
414719
414720
414721
414722
^C
Interrupted at block 414724
root@Microknoppix:~# badblocks /dev/sdb
414700
414701
414702
414703
414704
414705
414706
414707
414708
414709
414710
414716
414717
414720
414721
414722
414723
414724
^C
Interrupted at block 414725
root@Microknoppix:~# smartctl -t short /dev/sdb
smartctl 6.2 2013-04-20 r3812 [i686-linux-3.9.6] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 2 minutes for test to complete.
Test will complete after Mon Sep 22 21:54:06 2014
root@Microknoppix:~# smartctl -l selftest /dev/sdb
smartctl 6.2 2013-04-20 r3812 [i686-linux-3.9.6] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 60% 5142 829400
# 2 Short offline Completed: read failure 60% 5142 829408
# 3 Short offline Completed: read failure 50% 5142 829416
root@Microknoppix:~# smartctl -t long /dev/sdb
smartctl 6.2 2013-04-20 r3812 [i686-linux-3.9.6] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 228 minutes for test to complete.
Test will complete after Tue Sep 23 01:45:37 2014
root@Microknoppix:~# smartctl -l selftest /dev/sdb
smartctl 6.2 2013-04-20 r3812 [i686-linux-3.9.6] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 5142 829400
# 2 Short offline Completed: read failure 60% 5142 829400
# 3 Short offline Completed: read failure 60% 5142 829408
# 4 Short offline Completed: read failure 50% 5142 829416